CC1311R3 Module, +24dBm, N533GS
- Detail
- Parameters
N533GS radio module based CC1311 and PA.
Up to 30dBm output power, and down to -126dBm sensitivity. 433M, 868M, 915M used. CC1311 support AT command and UART.
N533GS integrated TI CC1311 and PA chip, which is suitable for 433M, 868MHz and 915MHz band. CC1311 module has the characteristics of low cost, low power consumption and small size. The module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. CC1311 module leads all pins out for secondary development.
N533GS (CC1311) is suitable for free frequency band in EU.
| RF Interface | Parameter |
| Frequency | 433M, 860M, 915MHz |
| Output Power | +24dBm |
| Sensitivity | -110dBm |
| Symbol Rate | 0.3-4000kbps |
| Deviation | +/-10kHz |
| Distance | 4000m |
| Hardware parameters | Value |
| Size | 32 x 22 x 3mm |
| Antenna Interface | IPEX, stamp hole |
| Communication Interface | UART, SPI |
| Package | SMD |
| Electrical Parameters | Minimum | Typical | Maximum |
| Volt | 1.8V | 3.3V | 3.9V |
| PA Volt | 3V | 5V | 6V |
| Emission Current | 400mA | ||
| Receiving Current | 6.9mA | ||
| Sleep current | 1uA | ||
| Working Temperature | -30℃ | 75℃ |
Pin Definition
Test method of N533GS module
Take the supporting base plate of Heyan technology as an example:
The bottom board of N533GS is T532AP, which integrates USB to serial chip, led, button, burning port and module card port. As shown in the figure:
N533GS-868M secondary development method:
The CC1311 module is stuck on the backplane as shown in the figure, and the IPEX is connected with the antenna. The burning port is connected with xds110 according to the silk screen printing, and then online simulation can be carried out to test the performance of the module.
Module Programming
The schematic diagram of the module base plate can be obtained from our official website.
Please contact us for specific programming information or download it from TI official website www.ti.com.